A library of ideas
Your next print
No models found
Try another search or clear your filters.
Build beyond the print
Explore electronics projects and experiments at Tricky Circuit.
Explore Tricky Circuit ↗
public demo
A library of ideas
Try another search or clear your filters.
Explore electronics projects and experiments at Tricky Circuit.
Start with your board. Adjust the room around it, then take the geometry to your slicer.
Built-in parametric toolDrag to rotate · + / − to zoom · arrow keys
Open top · no lid, mounting posts or holes
Width × depth × height
Preview and STL use the same validated dimensions.
Create an open rectangular box with uniform-grid compartments, up to 200 × 200 mm. Download a millimetre Z-up STL; physical printing and slicer settings are unverified.
Built-in parametric toolJavaScript is required to edit dimensions, preview the box and generate an STL. The purpose and limits below remain readable without it.
Drag to rotate · + / − to zoom · arrow keys
Open top · uniform cells · dividers reach the full inside height
Length × width × height · nominal geometry
Preview and STL share the same validated shape; STL is rotated to Z-up.
Drag to rotate · + / − to zoom · arrow keys
Original 3D geometry · no print photographs available
Preview colours are illustrative. STL contains geometry, not these colours. Choose filament colour in your print workflow.
Time and filament use, where available, are slicer estimates for a stated file and profile, not measured print results. Filament used is not the finished part’s mass. Missing values mean there is no verified slicing source.
Reviews and print reports are not available yet. Workshop review is a local demonstration and is not sent to the site.
Slicer estimate; varies with printer and settings.
Catalogue values use the first reviewed slicing source.
Approximate slicer values from the footer of a user-supplied G-code file, manually shared in chat.
Associated by object name, dimensions and preview. The G-code does not contain an STL checksum.
Settings describe the supplied G-code profile, not a verified match to your printer.
This file uses the geometry shown in the 3D viewer. Units are millimetres. Uploading your own files and 3MF support are planned for a later version.
Purchases and subscriptions are future options, not active features.